BusyBox v1.28.3 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 18.06.0, r7188-b0b5c64c22 ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:/# root@OpenWrt:/# cat /proc/cpuinfo system type : MediaTek MT7620A ver:2 eco:6 machine : YUKAI Engineering BOCCO processor : 0 cpu model : MIPS 24KEc V5.0 BogoMIPS : 385.84 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VCED exceptions : not available VCEI exceptions : not available root@OpenWrt:/# root@OpenWrt:/# dmesg [ 0.000000] Linux version 4.14.54 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 Mon Jul 30 16:25:17 2018 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc) [ 0.000000] MIPS: machine is YUKAI Engineering BOCCO [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 10000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat 80416f80, node_mem_map 81000040 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] random: get_random_bytes called from 0x8041a72c with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Writing ErrCtl register=00058741 [ 0.000000] Readback ErrCtl register=00058741 [ 0.000000] Memory: 255220K/262144K available (3552K kernel code, 179K rwdata, 460K rodata, 152K init, 222K bss, 6924K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [ 0.000000] systick: enable autosleep mode [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.015482] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.087724] pid_max: default: 32768 minimum: 301 [ 0.097149] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110176] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.130240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149732] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.161896] pinctrl core: initialized pinctrl subsystem [ 0.173469] NET: Registered protocol family 16 [ 0.187672] Can't analyze schedule() prologue at 80373d10 [ 0.214601] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.225638] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.238228] rt2880_gpio 10000638.gpio: registering 16 gpios [ 0.249220] rt2880_gpio 10000638.gpio: registering 16 irq handlers [ 0.261808] rt2880_gpio 10000660.gpio: registering 32 gpios [ 0.272807] rt2880_gpio 10000660.gpio: registering 32 irq handlers [ 0.285392] rt2880_gpio 10000688.gpio: registering 1 gpios [ 0.296214] rt2880_gpio 10000688.gpio: registering 1 irq handlers [ 0.313203] clocksource: Switched to clocksource systick [ 0.324907] NET: Registered protocol family 2 [ 0.334515] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.348319] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.360901] TCP: Hash tables configured (established 2048 bind 2048) [ 0.373675] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.385187] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.397909] NET: Registered protocol family 1 [ 0.406483] PCI: CLS 0 bytes, default 32 [ 0.408924] rt-timer 10000100.timer: maximum frequency is 1220Hz [ 0.421638] Crashlog allocated RAM at address 0x3f00000 [ 0.433503] workingset: timestamp_bits=30 max_order=16 bucket_order=0 [ 0.452103] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.463602] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.492031] io scheduler noop registered [ 0.499736] io scheduler deadline registered (default) [ 0.510966] gpio-export gpio_export: 2 gpio(s) exported [ 0.521514] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.537114] console [ttyS0] disabled [ 0.544172] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 0.563838] console [ttyS0] enabled [ 0.577653] bootconsole [early0] disabled [ 0.594258] cacheinfo: Failed to find cpu0 device node [ 0.604534] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.623583] spi spi0.0: force spi mode3 [ 0.632005] m25p80 spi0.0: mx25l6405d (8192 Kbytes) [ 0.641833] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.654498] Creating 4 MTD partitions on "spi0.0": [ 0.664057] 0x000000000000-0x000000030000 : "u-boot" [ 0.674920] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.686427] 0x000000040000-0x000000050000 : "factory" [ 0.697448] 0x000000050000-0x000000800000 : "firmware" [ 1.626035] 2 uimage-fw partitions found on MTD device firmware [ 1.637874] 0x000000050000-0x0000001ac913 : "kernel" [ 1.648681] 0x0000001ac913-0x000000800000 : "rootfs" [ 1.659447] mtd: device 5 (rootfs) set to be root filesystem [ 1.672149] 1 squashfs-split partitions found on MTD device rootfs [ 1.684537] 0x000000422000-0x000000800000 : "rootfs_data" [ 1.696995] libphy: Fixed MDIO Bus: probed [ 1.709814] gsw: setting port4 to ephy mode [ 1.718455] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver [ 1.730986] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 1.748039] rt2880_wdt 10000120.watchdog: Initialized [ 1.759587] NET: Registered protocol family 10 [ 1.772299] Segment Routing with IPv6 [ 1.779794] NET: Registered protocol family 17 [ 1.788713] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.814542] 8021q: 802.1Q VLAN Support v1.8 [ 1.835294] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 1.850248] Freeing unused kernel memory: 152K [ 1.859122] This architecture does not have kernel memory protection. [ 2.673142] random: fast init done [ 3.456581] init: Console is alive [ 3.463695] init: - watchdog - [ 5.671589] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 6.231869] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 6.250578] init: - preinit - [ 7.669412] 8021q: adding VLAN 0 to HW filter on device eth0 [ 9.532585] jffs2: notice: (358) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (2 unchecked, 1 orphan) and 3 of xref (1 dead, 0 orphan) found. [ 9.566187] mount_root: switching to jffs2 overlay [ 9.620140] overlayfs: upper fs does not support tmpfile. [ 9.638878] urandom-seed: Seed file not found (/etc/urandom.seed) [ 9.785858] procd: - early - [ 9.791801] procd: - watchdog - [ 10.125637] procd: - watchdog - [ 10.132201] procd: - ubus - [ 10.362520] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.476462] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.489750] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.503569] procd: - init - [ 11.003193] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.166859] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.188381] i2c /dev entries driver [ 11.199168] gdma-rt2880 10002800.gdma: revision: 3, channels: 16 [ 11.235378] i2c-ralink 10000900.i2c: clock 100KHz, re-start support [ 11.254137] wm8960 0-001a: Failed to issue reset [ 11.265964] ralink-i2s 10000a00.i2s: mclk 40KHz [ 11.285009] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [ 11.301031] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [ 11.319001] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.344601] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 11.438258] xt_time: kernel timezone is -0000 [ 11.602974] PPP generic driver version 2.4.2 [ 11.614542] NET: Registered protocol family 24 [ 11.657668] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [ 11.672140] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected [ 11.687606] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected [ 11.702034] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.782408] kmodloader: done loading kernel modules from /etc/modules.d/* [ 13.208036] urandom_read: 5 callbacks suppressed [ 13.208046] random: jshn: uninitialized urandom read (4 bytes read) [ 13.320404] random: ubusd: uninitialized urandom read (4 bytes read) [ 22.966647] 8021q: adding VLAN 0 to HW filter on device eth0 [ 23.016218] br-lan: port 1(eth0) entered blocking state [ 23.026726] br-lan: port 1(eth0) entered disabled state [ 23.037524] device eth0 entered promiscuous mode [ 23.193815] br-lan: port 1(eth0) entered blocking state [ 23.204263] br-lan: port 1(eth0) entered forwarding state [ 23.215251] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 23.993754] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready