BusyBox v1.28.3 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 18.06.0, r7188-b0b5c64c22 ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:/# root@OpenWrt:/# cat /proc/cpuinfo system type : MediaTek MT7620A ver:2 eco:6 machine : Planex MZK-EX750NP processor : 0 cpu model : MIPS 24KEc V5.0 BogoMIPS : 385.84 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VCED exceptions : not available VCEI exceptions : not available root@OpenWrt:/# root@OpenWrt:/# dmesg [ 0.000000] Linux version 4.14.54 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 Mon Jul 30 16:25:17 2018 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc) [ 0.000000] MIPS: machine is Planex MZK-EX750NP [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80416f80, node_mem_map 81000040 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] random: get_random_bytes called from 0x8041a72c with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=0005e591 [ 0.000000] Readback ErrCtl register=0005e591 [ 0.000000] Memory: 60292K/65536K available (3552K kernel code, 179K rwdata, 460K rodata, 152K init, 222K bss, 5244K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [ 0.000000] systick: enable autosleep mode [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.015474] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.087720] pid_max: default: 32768 minimum: 301 [ 0.097138] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110163] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.130123] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149604] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.161774] pinctrl core: initialized pinctrl subsystem [ 0.173319] NET: Registered protocol family 16 [ 0.186706] Can't analyze schedule() prologue at 80373d10 [ 0.450417] PCI host bridge /pcie@10140000 ranges: [ 0.459809] MEM 0x0000000020000000..0x000000002fffffff [ 0.470181] IO 0x0000000010160000..0x000000001016ffff [ 0.495479] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.506510] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.519080] rt2880_gpio 10000660.gpio: registering 32 gpios [ 0.530071] rt2880_gpio 10000660.gpio: registering 32 irq handlers [ 0.542653] rt2880_gpio 10000688.gpio: registering 1 gpios [ 0.553472] rt2880_gpio 10000688.gpio: registering 1 irq handlers [ 0.566407] PCI host bridge to bus 0000:00 [ 0.574407] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 0.588115] pci_bus 0000:00: root bus resource [io 0xffffffff] [ 0.599848] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.613348] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.629139] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400 [ 0.629182] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 0.629199] pci 0000:00:00.0: reg 0x14: [mem 0x20200000-0x2020ffff] [ 0.629280] pci 0000:00:00.0: supports D1 [ 0.629293] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.629742] pci 0000:01:00.0: [14c3:7650] type 00 class 0x028000 [ 0.629797] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.629937] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.630210] pci 0000:01:00.1: [14c3:8650] type 00 class 0x0d1100 [ 0.630258] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.630394] pci 0000:01:00.1: supports D1 [ 0.630405] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.630615] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.630636] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.630685] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 0.643740] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 0.657550] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] [ 0.671049] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] [ 0.684561] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] [ 0.698056] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.711552] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.721407] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 0.739227] clocksource: Switched to clocksource systick [ 0.750870] NET: Registered protocol family 2 [ 0.760442] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.774218] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.786808] TCP: Hash tables configured (established 1024 bind 1024) [ 0.799572] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.811082] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.823785] NET: Registered protocol family 1 [ 0.832401] PCI: CLS 80 bytes, default 32 [ 0.834771] rt-timer 10000100.timer: maximum frequency is 1220Hz [ 0.847438] Crashlog allocated RAM at address 0x3f00000 [ 0.859154] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.877728] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.889230] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.917241] io scheduler noop registered [ 0.924940] io scheduler deadline registered (default) [ 0.936064] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.951638] console [ttyS0] disabled [ 0.958633] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 0.978402] console [ttyS0] enabled [ 0.992174] bootconsole [early0] disabled [ 1.008746] cacheinfo: Failed to find cpu0 device node [ 1.019018] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.037410] spi spi0.0: force spi mode3 [ 1.057322] m25p80 spi0.0: s25fl064k (8192 Kbytes) [ 1.066937] 5 fixed-partitions partitions found on MTD device spi0.0 [ 1.079599] Creating 5 MTD partitions on "spi0.0": [ 1.089146] 0x000000000000-0x000000030000 : "u-boot" [ 1.099999] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.111479] 0x000000040000-0x000000050000 : "factory" [ 1.122469] 0x000000050000-0x000000780000 : "firmware" [ 1.991420] 2 uimage-fw partitions found on MTD device firmware [ 2.003254] 0x000000050000-0x0000001ac88b : "kernel" [ 2.014046] 0x0000001ac88b-0x000000780000 : "rootfs" [ 2.024796] mtd: device 5 (rootfs) set to be root filesystem [ 2.037435] 1 squashfs-split partitions found on MTD device rootfs [ 2.049819] 0x0000003ed000-0x000000780000 : "rootfs_data" [ 2.061504] 0x000000780000-0x000000800000 : "Udata" [ 2.072866] libphy: Fixed MDIO Bus: probed [ 2.085983] gsw: setting port4 to ephy mode [ 2.094611] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver [ 2.107120] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 2.124141] rt2880_wdt 10000120.watchdog: Initialized [ 2.135637] NET: Registered protocol family 10 [ 2.148261] Segment Routing with IPv6 [ 2.155747] NET: Registered protocol family 17 [ 2.164660] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.190487] 8021q: 802.1Q VLAN Support v1.8 [ 2.216381] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 2.231307] Freeing unused kernel memory: 152K [ 2.240181] This architecture does not have kernel memory protection. [ 2.759180] random: fast init done [ 3.764618] init: Console is alive [ 3.771715] init: - watchdog - [ 5.331303] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.597080] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.615616] init: - preinit - [ 7.455097] 8021q: adding VLAN 0 to HW filter on device eth0 [ 7.615892] random: procd: uninitialized urandom read (4 bytes read) [ 9.366594] jffs2: notice: (368) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 1 orphan) and 1 of xref (1 dead, 0 orphan) found. [ 9.400304] mount_root: switching to jffs2 overlay [ 9.448334] overlayfs: upper fs does not support tmpfile. [ 9.466354] urandom-seed: Seed file not found (/etc/urandom.seed) [ 9.748633] procd: - early - [ 9.755286] procd: - watchdog - [ 10.093577] procd: - watchdog - [ 10.100194] procd: - ubus - [ 10.334804] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.444675] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.457935] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.471667] procd: - init - [ 10.929185] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.948037] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.063719] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [ 11.079738] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [ 11.097202] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.116696] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 11.193660] xt_time: kernel timezone is -0000 [ 11.273360] PPP generic driver version 2.4.2 [ 11.284685] NET: Registered protocol family 24 [ 11.322894] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [ 11.337371] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected [ 11.352834] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected [ 11.367248] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.443759] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.705501] urandom_read: 5 callbacks suppressed [ 12.705511] random: jshn: uninitialized urandom read (4 bytes read) [ 21.866738] 8021q: adding VLAN 0 to HW filter on device eth0 [ 21.914874] br-lan: port 1(eth0) entered blocking state [ 21.925356] br-lan: port 1(eth0) entered disabled state [ 21.936155] device eth0 entered promiscuous mode [ 22.035402] br-lan: port 1(eth0) entered blocking state [ 22.045877] br-lan: port 1(eth0) entered forwarding state [ 22.056833] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 22.882734] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready