BusyBox v1.28.3 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 18.06.0, r7188-b0b5c64c22 ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:~# root@OpenWrt:~# cat /proc/cpuinfo system type : Ralink RT5350 id:1 rev:3 machine : Planex MZK-DP150N processor : 0 cpu model : MIPS 24KEc V4.12 BogoMIPS : 239.61 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VCED exceptions : not available VCEI exceptions : not available root@OpenWrt:~# root@OpenWrt:~# dmesg [ 0.000000] Linux version 4.14.54 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 Mon Jul 30 16:25:17 2018 [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) [ 0.000000] MIPS: machine is Planex MZK-DP150N [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 803eae30, node_mem_map 81000040 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] random: get_random_bytes called from 0x803ee72c with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00004000 [ 0.000000] Readback ErrCtl register=00004000 [ 0.000000] Memory: 27960K/32768K available (3417K kernel code, 175K rwdata, 424K rodata, 200K init, 210K bss, 4808K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 360MHz [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 10618113593 ns [ 0.000016] sched_clock: 32 bits at 180MHz, resolution 5ns, wraps every 11930464253ns [ 0.015714] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080) [ 0.098013] pid_max: default: 32768 minimum: 301 [ 0.107611] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.120728] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.143582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.163142] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.175396] pinctrl core: initialized pinctrl subsystem [ 0.188464] NET: Registered protocol family 16 [ 0.206682] Can't analyze schedule() prologue at 80352170 [ 0.256401] rt2880_gpio 10000600.gpio: registering 22 gpios [ 0.267546] rt2880_gpio 10000600.gpio: registering 22 irq handlers [ 0.280583] rt2880_gpio 10000660.gpio: registering 6 gpios [ 0.291544] rt2880_gpio 10000660.gpio: registering 6 irq handlers [ 0.313785] clocksource: Switched to clocksource MIPS [ 0.326050] NET: Registered protocol family 2 [ 0.336617] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.350515] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.363102] TCP: Hash tables configured (established 1024 bind 1024) [ 0.376093] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.387743] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.400686] NET: Registered protocol family 1 [ 0.415468] rt-timer 10000100.timer: maximum frequency is 3662Hz [ 0.429074] Crashlog allocated RAM at address 0x1f00000 [ 0.443514] workingset: timestamp_bits=30 max_order=13 bucket_order=0 [ 0.467077] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.478667] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.523355] io scheduler noop registered [ 0.531133] io scheduler deadline registered (default) [ 0.543017] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.561659] console [ttyS0] disabled [ 0.568840] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 0.588554] console [ttyS0] enabled [ 0.602336] bootconsole [early0] disabled [ 0.619235] cacheinfo: Failed to find cpu0 device node [ 0.629605] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.658925] spi spi0.0: force spi mode3 [ 0.668021] m25p80 spi0.0: en25q32b (4096 Kbytes) [ 0.677602] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.690319] Creating 4 MTD partitions on "spi0.0": [ 0.699928] 0x000000000000-0x000000030000 : "uboot" [ 0.711522] 0x000000030000-0x000000040000 : "uboot-env" [ 0.724009] 0x000000040000-0x000000050000 : "factory" [ 0.736011] 0x000000050000-0x000000400000 : "firmware" [ 0.783124] 2 uimage-fw partitions found on MTD device firmware [ 0.795073] 0x000000050000-0x00000019e432 : "kernel" [ 0.806862] 0x00000019e432-0x000000400000 : "rootfs" [ 0.818581] mtd: device 5 (rootfs) set to be root filesystem [ 0.833597] 1 squashfs-split partitions found on MTD device rootfs [ 0.846087] 0x0000003c0000-0x000000400000 : "rootfs_data" [ 0.859782] libphy: Fixed MDIO Bus: probed [ 0.876642] rt3050-esw 10110000.esw: link changed 0x00 [ 0.889925] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 0.907504] rt2880_wdt 10000120.watchdog: Initialized [ 0.920215] NET: Registered protocol family 10 [ 0.938343] Segment Routing with IPv6 [ 0.946001] NET: Registered protocol family 17 [ 0.955087] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.981015] 8021q: 802.1Q VLAN Support v1.8 [ 1.008953] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 1.025359] Freeing unused kernel memory: 200K [ 1.034302] This architecture does not have kernel memory protection. [ 2.663826] random: fast init done [ 2.733669] init: Console is alive [ 2.741183] init: - watchdog - [ 4.515067] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.819431] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.844924] init: - preinit - [ 6.733323] rt3050-esw 10110000.esw: link changed 0x00 [ 7.048654] random: procd: uninitialized urandom read (4 bytes read) [ 8.881729] rt3050-esw 10110000.esw: link changed 0x10 [ 10.419149] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 10.482394] urandom-seed: Seed file not found (/etc/urandom.seed) [ 10.678430] procd: - early - [ 10.684628] procd: - watchdog - [ 11.462812] procd: - watchdog - [ 11.470074] procd: - ubus - [ 11.736917] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.863140] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.877021] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.892876] procd: - init - [ 12.490612] kmodloader: loading kernel modules from /etc/modules.d/* [ 12.515528] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.550066] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [ 12.566183] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [ 12.587914] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.615033] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 12.753013] xt_time: kernel timezone is -0000 [ 12.856978] PPP generic driver version 2.4.2 [ 12.870878] NET: Registered protocol family 24 [ 12.926399] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [ 12.940978] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected [ 12.956505] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected [ 12.971528] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.119207] kmodloader: done loading kernel modules from /etc/modules.d/* [ 14.680841] urandom_read: 5 callbacks suppressed [ 14.680857] random: jshn: uninitialized urandom read (4 bytes read) [ 23.135067] rt3050-esw 10110000.esw: link changed 0x00 [ 25.265829] rt3050-esw 10110000.esw: link changed 0x10 [ 25.378979] rt3050-esw 10110000.esw: link changed 0x00 [ 27.690390] rt3050-esw 10110000.esw: link changed 0x10 [ 33.140577] rt3050-esw 10110000.esw: link changed 0x00 [ 34.981282] rt3050-esw 10110000.esw: link changed 0x10 [ 35.504548] jffs2: Too few erase blocks (4) [ 36.186907] br-lan: port 1(eth0.1) entered blocking state [ 36.197857] br-lan: port 1(eth0.1) entered disabled state [ 36.209394] device eth0.1 entered promiscuous mode [ 36.219098] device eth0 entered promiscuous mode [ 36.449490] br-lan: port 1(eth0.1) entered blocking state [ 36.460398] br-lan: port 1(eth0.1) entered forwarding state [ 36.472021] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 37.194300] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 125.573942] random: crng init done [ 125.781027] rt3050-esw 10110000.esw: link changed 0x00 [ 128.107925] rt3050-esw 10110000.esw: link changed 0x10