BusyBox v1.28.3 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 18.06.0, r7188-b0b5c64c22 ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:~# root@OpenWrt:~# cat /proc/cpuinfo system type : Atheros AR9330 rev 1 machine : PQI Air Pen processor : 0 cpu model : MIPS 24Kc V7.4 BogoMIPS : 232.24 wait instruction : yes microsecond timers : yes tlb_entries : 16 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VCED exceptions : not available VCEI exceptions : not available root@OpenWrt:~# root@OpenWrt:~# dmesg [ 0.000000] Linux version 4.9.111 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9) ) #0 Mon Jul 30 16:25:17 2018 [ 0.000000] MyLoader: sysp=39ac0d71, boardp=371aedad, parts=09bfe3ea [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 80441ee4, node_mem_map 81000020 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: board=PQI-AIR-PEN mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF) console=ttyATH0,115200 rootfstype=squashfs noinitrd [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 27532K/32768K available (3361K kernel code, 174K rwdata, 444K rodata, 300K init, 219K bss, 5236K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:350.000MHz, DDR:350.000MHz, AHB:175.000MHz, Ref:25.000MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 10921488265 ns [ 0.000015] sched_clock: 32 bits at 175MHz, resolution 5ns, wraps every 12271335421ns [ 0.007586] Calibrating delay loop... 232.24 BogoMIPS (lpj=1161216) [ 0.088713] pid_max: default: 32768 minimum: 301 [ 0.093314] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.099460] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.118545] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.126389] NET: Registered protocol family 16 [ 0.131691] MIPS: machine is PQI Air Pen [ 0.415005] Can't analyze schedule() prologue at 803a4bd4 [ 0.436950] clocksource: Switched to clocksource MIPS [ 0.442105] NET: Registered protocol family 2 [ 0.446514] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.451884] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.457940] TCP: Hash tables configured (established 1024 bind 1024) [ 0.464146] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.469614] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.475909] NET: Registered protocol family 1 [ 0.479791] PCI: CLS 0 bytes, default 32 [ 0.485024] Crashlog allocated RAM at address 0x1f00000 [ 0.490184] workingset: timestamp_bits=30 max_order=13 bucket_order=0 [ 0.507327] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.511525] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.534062] io scheduler noop registered [ 0.536435] io scheduler deadline registered (default) [ 0.542084] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.551932] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.559843] console [ttyATH0] enabled [ 0.566560] bootconsole [early0] disabled [ 0.582774] m25p80 spi0.0: found s25fl064k, expected m25p80 [ 0.599544] m25p80 spi0.0: s25fl064k (8192 Kbytes) [ 0.602950] 6 cmdlinepart partitions found on MTD device spi0.0 [ 0.608819] Creating 6 MTD partitions on "spi0.0": [ 0.613573] 0x000000000000-0x000000040000 : "u-boot" [ 0.620830] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.627289] 0x000000050000-0x000000060000 : "art" [ 0.633069] 0x000000060000-0x000000070000 : "NVRAM" [ 0.639109] 0x000000070000-0x0000007f0000 : "firmware" [ 0.656634] 2 uimage-fw partitions found on MTD device firmware [ 0.661181] 0x000000070000-0x0000001c0000 : "kernel" [ 0.668551] 0x0000001c0000-0x0000007f0000 : "rootfs" [ 0.674562] mtd: device 6 (rootfs) set to be root filesystem [ 0.678914] 1 squashfs-split partitions found on MTD device rootfs [ 0.684959] 0x000000420000-0x0000007f0000 : "rootfs_data" [ 0.692952] 0x0000007f0000-0x000000800000 : "CONF" [ 0.700293] libphy: Fixed MDIO Bus: probed [ 0.722884] libphy: ag71xx_mdio: probed [ 1.348690] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.357606] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.364742] NET: Registered protocol family 10 [ 1.372877] NET: Registered protocol family 17 [ 1.375948] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.389057] 8021q: 802.1Q VLAN Support v1.8 [ 1.395605] hctosys: unable to open rtc device (rtc0) [ 1.407238] VFS: Mounted root (squashfs filesystem) readonly on device 31:6. [ 1.415453] Freeing unused kernel memory: 300K [ 1.418504] This architecture does not have kernel memory protection. [ 2.461688] init: Console is alive [ 2.463994] init: - watchdog - [ 2.556968] random: fast init done [ 4.078998] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.179079] usbcore: registered new interface driver usbfs [ 4.183263] usbcore: registered new interface driver hub [ 4.188660] usbcore: registered new device driver usb [ 4.201740] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.220213] SCSI subsystem initialized [ 4.229764] ehci-platform: EHCI generic platform driver [ 4.233722] ehci-platform ehci-platform: EHCI Host Controller [ 4.239390] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 4.249342] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 4.276982] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 4.283196] hub 1-0:1.0: USB hub found [ 4.286117] hub 1-0:1.0: 1 port detected [ 4.296131] usbcore: registered new interface driver usb-storage [ 4.301751] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.311631] init: - preinit - [ 5.462137] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.528463] eth0: link up (100Mbps/Full duplex) [ 7.531595] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.729081] jffs2: notice: (404) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 8.745380] mount_root: switching to jffs2 overlay [ 8.796089] urandom-seed: Seeding with /etc/urandom.seed [ 9.109771] eth0: link down [ 9.130480] procd: - early - [ 9.132064] procd: - watchdog - [ 9.847172] procd: - watchdog - [ 9.849284] procd: - ubus - [ 10.002784] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.087505] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.093128] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.100339] procd: - init - [ 10.645020] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.658037] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.679846] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [ 10.686403] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [ 10.697896] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.715875] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 10.811566] xt_time: kernel timezone is -0000 [ 10.898437] PPP generic driver version 2.4.2 [ 10.905164] NET: Registered protocol family 24 [ 10.969495] ath: EEPROM regdomain: 0x0 [ 10.969510] ath: EEPROM indicates default country code should be used [ 10.969516] ath: doing EEPROM country->regdmn map search [ 10.969539] ath: country maps to regdmn code: 0x3a [ 10.969548] ath: Country alpha2 being used: US [ 10.969554] ath: Regpair used: 0x3a [ 10.982096] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 10.989156] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 11.041156] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.845977] urandom_read: 5 callbacks suppressed [ 12.845990] random: jshn: uninitialized urandom read (4 bytes read) [ 12.980670] random: ubusd: uninitialized urandom read (4 bytes read) [ 27.802559] br-lan: port 1(eth0) entered blocking state [ 27.806342] br-lan: port 1(eth0) entered disabled state [ 27.812251] device eth0 entered promiscuous mode [ 27.848754] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 29.848527] eth0: link up (100Mbps/Full duplex) [ 29.851694] br-lan: port 1(eth0) entered blocking state [ 29.856829] br-lan: port 1(eth0) entered forwarding state [ 29.903994] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready