BusyBox v1.28.3 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 18.06.0, r7188-b0b5c64c22 ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:~# root@OpenWrt:~# cat /proc/cpuinfo system type : MediaTek MT7620A ver:2 eco:3 machine : Planex MZK-750DHP processor : 0 cpu model : MIPS 24KEc V5.0 BogoMIPS : 385.84 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VCED exceptions : not available VCEI exceptions : not available root@OpenWrt:~# root@OpenWrt:~# dmesg [ 0.000000] Linux version 4.14.54 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 Mon Jul 30 16:25:17 2018 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:3 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc) [ 0.000000] MIPS: machine is Planex MZK-750DHP [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80416f80, node_mem_map 81000040 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] random: get_random_bytes called from 0x8041a72c with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=0001cb3b [ 0.000000] Readback ErrCtl register=0001cb3b [ 0.000000] Memory: 60296K/65536K available (3552K kernel code, 179K rwdata, 460K rodata, 152K init, 222K bss, 5240K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [ 0.000000] systick: enable autosleep mode [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.015476] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.087711] pid_max: default: 32768 minimum: 301 [ 0.097130] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110156] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.129989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149468] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.161637] pinctrl core: initialized pinctrl subsystem [ 0.173189] NET: Registered protocol family 16 [ 0.186537] Can't analyze schedule() prologue at 80373d10 [ 0.672295] PCI host bridge /pcie@10140000 ranges: [ 0.681689] MEM 0x0000000020000000..0x000000002fffffff [ 0.692061] IO 0x0000000010160000..0x000000001016ffff [ 0.717347] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.728378] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.740944] rt2880_gpio 10000638.gpio: registering 16 gpios [ 0.751934] rt2880_gpio 10000638.gpio: registering 16 irq handlers [ 0.764498] rt2880_gpio 10000660.gpio: registering 32 gpios [ 0.775488] rt2880_gpio 10000660.gpio: registering 32 irq handlers [ 0.788637] PCI host bridge to bus 0000:00 [ 0.796636] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 0.810345] pci_bus 0000:00: root bus resource [io 0xffffffff] [ 0.822078] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.835577] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.851368] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400 [ 0.851411] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 0.851428] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 0.851508] pci 0000:00:00.0: supports D1 [ 0.851521] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.851788] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.867813] pci 0000:01:00.0: [14c3:7650] type 00 class 0x028000 [ 0.867868] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.868013] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.868266] pci 0000:01:00.1: [14c3:8650] type 00 class 0x0d1100 [ 0.868316] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.868449] pci 0000:01:00.1: supports D1 [ 0.868460] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.868677] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.868699] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.868752] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 0.881806] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 0.895617] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] [ 0.909117] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] [ 0.922627] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] [ 0.936121] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.949618] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.959472] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 0.977291] clocksource: Switched to clocksource systick [ 0.988952] NET: Registered protocol family 2 [ 0.998527] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 1.012303] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 1.024890] TCP: Hash tables configured (established 1024 bind 1024) [ 1.037658] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.049167] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.061877] NET: Registered protocol family 1 [ 1.070493] PCI: CLS 0 bytes, default 32 [ 1.072815] rt-timer 10000100.timer: maximum frequency is 1220Hz [ 1.085493] Crashlog allocated RAM at address 0x3f00000 [ 1.097200] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 1.115730] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.127225] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 1.155288] io scheduler noop registered [ 1.162988] io scheduler deadline registered (default) [ 1.174122] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 1.189697] console [ttyS0] disabled [ 1.196691] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 1.216460] console [ttyS0] enabled [ 1.230233] bootconsole [early0] disabled [ 1.246779] cacheinfo: Failed to find cpu0 device node [ 1.257050] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.275396] spi spi0.0: force spi mode3 [ 1.295656] m25p80 spi0.0: s25fl064k (8192 Kbytes) [ 1.305267] 4 fixed-partitions partitions found on MTD device spi0.0 [ 1.317930] Creating 4 MTD partitions on "spi0.0": [ 1.327490] 0x000000000000-0x000000030000 : "u-boot" [ 1.338302] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.349779] 0x000000040000-0x000000050000 : "factory" [ 1.360771] 0x000000050000-0x000000800000 : "firmware" [ 2.302884] 2 uimage-fw partitions found on MTD device firmware [ 2.314718] 0x000000050000-0x0000001ac7df : "kernel" [ 2.325505] 0x0000001ac7df-0x000000800000 : "rootfs" [ 2.336250] mtd: device 5 (rootfs) set to be root filesystem [ 2.348881] 1 squashfs-split partitions found on MTD device rootfs [ 2.361264] 0x0000003ed000-0x000000800000 : "rootfs_data" [ 2.373671] libphy: Fixed MDIO Bus: probed [ 2.386273] gsw: setting port4 to ephy mode [ 2.394686] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 3 link up (100Mbps/Full duplex) [ 2.413118] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver [ 2.425619] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 2.442653] rt2880_wdt 10000120.watchdog: Initialized [ 2.454171] NET: Registered protocol family 10 [ 2.466768] Segment Routing with IPv6 [ 2.474256] NET: Registered protocol family 17 [ 2.483169] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.508997] 8021q: 802.1Q VLAN Support v1.8 [ 2.534822] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 2.549745] Freeing unused kernel memory: 152K [ 2.558618] This architecture does not have kernel memory protection. [ 2.927246] random: fast init done [ 4.083560] init: Console is alive [ 4.090720] init: - watchdog - [ 5.649933] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.914834] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.933368] init: - preinit - [ 7.771448] 8021q: adding VLAN 0 to HW filter on device eth0 [ 7.932122] random: procd: uninitialized urandom read (4 bytes read) [ 9.763751] jffs2: notice: (361) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (2 unchecked, 1 orphan) and 3 of xref (1 dead, 0 orphan) found. [ 9.797451] mount_root: switching to jffs2 overlay [ 9.842858] overlayfs: upper fs does not support tmpfile. [ 9.863995] urandom-seed: Seeding with /etc/urandom.seed [ 10.151295] procd: - early - [ 10.157223] procd: - watchdog - [ 10.490949] procd: - watchdog - [ 10.497497] procd: - ubus - [ 10.729080] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.841183] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.854457] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.868242] procd: - init - [ 11.324008] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.342882] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.458563] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [ 11.474585] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [ 11.492099] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.511608] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 11.588551] xt_time: kernel timezone is -0000 [ 11.667044] PPP generic driver version 2.4.2 [ 11.678276] NET: Registered protocol family 24 [ 11.716346] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [ 11.730814] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected [ 11.746276] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected [ 11.760686] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.837171] kmodloader: done loading kernel modules from /etc/modules.d/* [ 13.165584] urandom_read: 5 callbacks suppressed [ 13.165594] random: jshn: uninitialized urandom read (4 bytes read) [ 22.412818] 8021q: adding VLAN 0 to HW filter on device eth0 [ 22.459068] br-lan: port 1(eth0.1) entered blocking state [ 22.469923] br-lan: port 1(eth0.1) entered disabled state [ 22.481072] device eth0.1 entered promiscuous mode [ 22.490658] device eth0 entered promiscuous mode [ 22.659578] br-lan: port 1(eth0.1) entered blocking state [ 22.670368] br-lan: port 1(eth0.1) entered forwarding state [ 22.681701] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 23.419634] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready